Every SOPEEC multiple-choice paper is 100 questions in 3 hours, and you need 65% to pass. The question everyone asks next is where those 100 questions come from. This page answers it the way it's most useful to you while you study: chapter by chapter. For every paper, from 5th Class to 1st Class, it shows which chapters the questions are typically drawn from, about how many questions those chapters usually account for, and how much material sits behind them. Put together, that tells you where your study hours tend to earn the most marks.
These are typical numbers, not a fixed breakdown. SOPEEC doesn't publish an official question split for any paper. Each paper is set in several versions through the year, and the mix of questions shifts from one version to the next. Russ has worked as an examiner, and the jurisdictional exam offices we checked with said the same thing: a breakdown like this is a fair general guide to where the questions come from, not a count you can rely on for your sitting. Read every number on this page as "about", and don't drop a chapter because its typical count is small.
Exam format at a glance
| Class | Papers | Per paper | Pass mark |
|---|---|---|---|
| 5th Class | One paper | 100 questions, 3 hours | 65% |
| 4th Class | 4A, 4B | 100 questions, 3 hours | 65% |
| 3rd Class | 3A1, 3A2, 3B1, 3B2 | 100 questions, 3 hours | 65% |
| 2nd Class | 2A1, 2A2, 2A3, 2B1, 2B2, 2B3 | 100 questions, 3 hours | 65% |
| 1st Class | 1B4 is multiple choice; the other papers are written | 100 questions, 3 hours (1B4) | 65% |
Confirm the current format for your paper with your jurisdiction (ABSA in Alberta) before you book.
How to read the tables
- From these chapters is where the material is taught in the Full Steam Ahead course for that paper. The chapter titles are listed so you can match them to your own textbook.
- Exam topics is what that material is usually called when people describe the paper.
- Typical questions is roughly how many of the 100 those chapters commonly account for. Your paper may have a few more or a few less.
- Objectives is how many learning objectives those chapters hold. It's a fair measure of how much there is to learn.
- Focus compares the last two. Chapters that typically carry a lot of questions for a small amount of material are rated Highest or High. Chapters with a lot of material and comparatively few questions are rated Lighter.
One example. On 2A3, the pumps chapter has 7 objectives and typically accounts for about 20 questions. The five water treatment chapters have 40 objectives between them and typically account for about 35. Water treatment is worth more marks overall, but an hour on pumps tends to buy you far more of them. That's what the Focus column shows. The method, and how to turn it into a study week, is in where to focus your power engineering study time.
Lighter does not mean skip. You need 65 questions right, and the mix on your paper can lean toward a chapter that's usually light. Cover every chapter properly. The Focus column is about where your second and third passes go.
5th Class
5th Class is a single paper. Full Steam Ahead doesn't teach 5th Class, so this table has no chapter column. Weight compares each topic's typical share with an even split across the 14 topics.
| Exam topic | Typical questions | Weight |
|---|---|---|
| Science | about 5 | Lighter |
| Safety | about 8 | Standard |
| Welding & Plumbing | about 5 | Lighter |
| Pipe | about 5 | Lighter |
| Boilers | about 10 | High |
| Low-Pressure Boilers | about 10 | High |
| Fuels & Combustion | about 10 | High |
| Controls | about 10 | High |
| Operations & Maintenance | about 10 | High |
| Heating Systems | about 5 | Lighter |
| Refrigeration and AC Systems | about 8 | Standard |
| Refrigeration and AC Controls | about 8 | Standard |
| Air Compressors | about 3 | Lighter |
| Electrical | about 3 | Lighter |
Boilers, low-pressure boilers, fuels and combustion, controls, and operations and maintenance typically make up about half the paper between them.
4th Class
4th Class is two papers, 4A and 4B. Full Steam Ahead sells them separately as exam prep: unlimited chapter tests, full practice exams and a weak-area breakdown after every attempt. The chapter numbers below are the chapters in that prep, which follow the standard 4th Class curriculum.
4A
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1–9Introduction to Basic Mechanics · Forces and Moments · Simple Machines · Scalars and Vectors · Linear Velocity and Acceleration · Force, Work, Pressure, Power, and Energy · Friction · Stress and Strain · Power Transmission | Mechanics & Dynamics | about 7 | 20 | Lighter |
| Ch 10–13Introduction to Matter and Chemistry · Introduction to Thermodynamics · Introduction to Heat Transfer and Heat Exchangers · Thermodynamics of Steam | Chemistry & Thermodynamics | about 10 | 18 | High |
| Ch 14–16Introduction to Power Engineering · Jurisdictional Legislation for Power Engineers · Codes and Standards for Power Engineers and Pressure Vessels | Codes & Standards | about 4 | 14 | Lighter |
| Ch 17–21Introduction to Plant Safety · Plant Safety Programs · Handling of Dangerous Materials · Plant Fire Safety · Fire Extinguishing Methods and Equipment | Plant SafetyPower & Heating Plant Safety | about 10 | 22 | Standard |
| Ch 22–24Introduction to the Environment · Gas and Noise Emissions · Liquid and Solid Emissions | Environment | about 6 | 16 | Lighter |
| Ch 25–27Energy Plant Construction and Operation Materials · Introduction to Welding · Boiler and Pressure Vessel Weld Inspection | Materials & Welding | about 7 | 14 | Standard |
| Ch 28–29Introduction to Energy Plant Piping Systems · Introduction to Energy Plant Valves | Piping & Valves | about 7 | 10 | Highest |
| Ch 30–35Basic Electricity · Magnetism and Electromagnetism · Electrical Metering Devices · Motors and Generators · Transformers · Electrical Distribution Circuits | Electricity | about 7 | 28 | Lighter |
| Ch 36–41Introduction to Energy Plant Controls and Instrumentation · Introduction to Process Measurement · Basic Control and Instrumentation Components · Introduction to Programmable Controllers · Electronic Control Systems and Computer Applications · Electrical Control Systems | Instrumentation & Controls | about 10 | 22 | Standard |
| Ch 42–44Energy Plant Sketching · Plant Diagrams and Drawings · Plant Communications | Drawings & Plant CommunicationPlant Communication | about 2 | 14 | Lighter |
| Ch 45–50Introduction to Boilers · Firetube Boilers · Watertube Boilers · Electric Boilers · Special Boiler Designs for Heating Plants · Differences between Power and Heating Boilers | Boilers | about 15 | 18 | Highest |
| Ch 51–56Combustion · Fuel Delivery and Firing Systems · Draft · Feedwater Systems · Blowoff and Blowdown Systems · Boiler Fireside Cleaning Systems | Boiler Systems | about 15 | 28 | High |
The boiler chapters (45 to 56) typically account for close to a third of 4A, and the boiler design chapters (45 to 50) are the best return on the paper. Piping and valves is the other standout: two chapters that commonly carry about 7 questions. Electricity runs the other way. It's six chapters and 28 objectives that typically account for about the same 7, so learn the fundamentals well and don't disappear into it.
4B
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1–2Lubrication Principles · Types of Bearings and Lubrication | Lubrication | about 6 | 8 | Highest |
| Ch 3–6Types of Pumps · Pump Operation and Maintenance · Introduction to Compressors · Compressor Operation and Maintenance | Pumps & Compressors | about 10 | 15 | Highest |
| Ch 7–11Pressure Relief Valves · Combustion Safety · Water Level Safety Controls · Boiler Fittings · Firing Rate Controls | Boiler Safety | about 10 | 19 | High |
| Ch 12–17Boiler Plant Startup · Boiler Startup · Boiler Operation · Operational Checks · Shutdown Procedures · Boiler Plant Monitoring and Reporting | Boiler Plant OperationBoiler Plant Ops | about 14 | 29 | High |
| Ch 18–21Energy Plant Maintenance I · Energy Plant Maintenance II · Boiler Maintenance · Boiler Cleaning | Plant Maintenance | about 10 | 18 | High |
| Ch 22–26External Boiler Water Treatment · Internal Boiler Water Treatment · Condensate Treatment · Cooling Tower and Condenser Water Treatment · Recirculating System Water Treatment | Water Treatment | about 10 | 17 | High |
| Ch 27–31Heat Engines and Prime Movers · Steam Turbines · Condensers and Cooling Towers · Gas Turbines · Internal Combustion Engines | Prime Movers | about 7 | 21 | Lighter |
| Ch 32–34Lighting Systems · Building Water Systems · Drainage Systems | Auxiliary Building SystemsAux Building | about 3 | 14 | Lighter |
| Ch 35–41Refrigeration Basics · Compression Refrigeration Systems · Refrigeration System Control and Operation · Refrigeration System Operation and Maintenance · Absorption Refrigeration Systems · Refrigeration Plant Safety · Ammonia Refrigeration Safety | Refrigeration | about 14 | 43 | Lighter |
| Ch 42–47Conditioning the Air · Humidification · Fans for Air Distribution Systems · Ventilation and Air Filters · HVAC Duct Systems · Types of Coils and Operation | HVAC | about 7 | 23 | Lighter |
| Ch 48–53Steam Heating · Hot Water Heating · Other Heating Systems · Cooling Systems and Combination Systems · Heat Gains and Losses, and Heat Recovery Methods · HVAC Control Strategy | Heating & Cooling SystemsHeat & Cool Systems | about 7 | 27 | Lighter |
| Ch 54–55Common Plant Configurations in Hydrocarbon-centric Industries · Common Plant Configurations in Energy-Intensive Industries | Plant Types | about 2 | 8 | Lighter |
Chapters 1 to 26, the operating chapters (lubrication, pumps and compressors, boiler safety, plant operation, maintenance and water treatment), typically account for around 60 questions and are all rated High or better. Refrigeration is the one to plan around: seven chapters and 43 objectives for a typical 14 or so questions.
3rd Class
3rd Class is four papers. The A papers are the theory (math, mechanics, thermodynamics, chemistry, codes, electrical, controls). The B papers are the equipment and its operation.
3A1
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1–3Algebraic Operations, Logarithms & Problem Solving · Trigonometry · Mensuration | Not tested on its own. Every calculation on the paper depends on it. | – | 20 | Foundation |
| Ch 4–7Forces & Friction · Work, Power, Energy: Linear & Angular Motion · Strength of Materials · Bending of Beams · Simple Machines · Pressure, Density, Flow | Applied MechanicsMechanics Fundamentals, Work & Energy, Stress & Strain | about 27 | 29 | Standard |
| Ch 8–11Heat, State Change, Calorimetry · Thermal Expansion & Heat Transfer · Steam Properties & Calculations · Gas Laws & Calculations | ThermodynamicsThermodynamic Basics, Advanced Thermodynamics | about 54 | 28 | Highest |
| Ch 12Chemistry Fundamentals | ChemistryBasic Chemistry | about 7 | 8 | Standard |
| Ch 13–14Metallurgy & Materials · Corrosion Principles | Metallurgy & CorrosionMetallurgy Principles | about 7 | 16 | Lighter |
| Ch 15Industrial Drawings | Industrial Drawings | about 5 | 5 | Standard |
3A1 is a thermodynamics paper with some mechanics attached. Chapters 8 to 11 typically account for over half the questions, the biggest single block anywhere in 3rd Class. The math chapters (1 to 3) aren't usually tested on their own, but nothing else on the paper works without them, so get them solid early and then move on.
3A2
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1–2Legislation and Codes for Power Engineers · Code Calculations - ASME Section I | Codes & Legislation | about 8 | 12 | Lighter |
| Ch 3Fuels, Combustion, and Flue Gas Analysis | Fuels & CombustionFuel & Combustion, Combustion & Flue Gas | about 19 | 10 | Highest |
| Ch 4–6Piping Design, Connections, and Support · Steam Traps, Water Hammer, and Insulation · Valves and Actuators | Piping, Valves & InsulationPiping, Valves & Insulation | about 14 | 30 | Lighter |
| Ch 7–10Electrical Theory and DC Machines · AC Theory and Machines · AC Systems, Switchgear, and Safety · Electrical Calculations | ElectricalDC Theory, AC Theory, AC Systems, Electrical Calculations 1, Electrical Calculations 2 | about 27 | 33 | Standard |
| Ch 11–13Control Loops and Strategies · Instrument and Control Devices · Distributed and Logic Control | Instrumentation & ControlInstrumentation & Controls, DCS | about 26 | 18 | Highest |
| Ch 14–15Safety Management Systems · Fire Protection Systems | Safety & Fire ProtectionSafety Programs, Fire Systems | about 6 | 19 | Lighter |
Two chapter groups stand out on 3A2. Fuels, combustion and flue gas analysis (chapter 3) commonly carries close to 20 questions from a single chapter, and instrumentation and control (chapters 11 to 13) commonly carries around a quarter of the paper. Piping, valves and insulation runs the other way: three chapters and 30 objectives for a typical 14 or so.
3B1
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1Watertube Boiler Designs | Watertube BoilersWatertube Boiler | about 7 | 7 | High |
| Ch 2Special Boiler Designs | Special BoilersSpecial Boiler | about 3 | 7 | Lighter |
| Ch 3Boiler Construction | Boiler Construction | about 3 | 7 | Lighter |
| Ch 4Boiler Heat Transfer Components | Boiler Heat TransferHeat Transfer | about 7 | 9 | Standard |
| Ch 5High-Pressure Boiler Fittings | High-Pressure FittingsHP Fittings | about 10 | 10 | High |
| Ch 6Burner Designs and Supply Systems | BurnersBurner | about 3 | 8 | Lighter |
| Ch 7Boiler Draft and Flue Gas Equipment | Draft & Flue GasDraft | about 7 | 8 | Standard |
| Ch 8Boiler Control Systems | Boiler ControlsControl Systems | about 7 | 10 | Lighter |
| Ch 9Boiler Procedures | Boiler ProceduresProcedure | about 3 | 8 | Lighter |
| Ch 10Internal Water Treatment for Boilers | Internal Water Treatment | about 10 | 6 | Highest |
| Ch 11Boiler Water Pre-treatment | Water Pre-treatmentWater Pretreatment | about 7 | 10 | Lighter |
| Ch 12Pump Designs and Operation | Pump Design | about 7 | 9 | Standard |
| Ch 13Pump Head Calculations | Pump CalculationsPump Calculation | about 6 | 6 | High |
| Ch 14Welding Procedures and Inspection | Welding | about 10 | 8 | Highest |
| Ch 15Pressure Vessels | Pressure VesselsPressure Vessel | about 10 | 7 | Highest |
3B1 lines up almost one chapter to one exam topic, which makes it easy to plan. Internal water treatment, pressure vessels and welding tend to be the highest-return chapters on the paper. Special boilers, boiler construction, burners and procedures typically account for only a few questions each.
3B2
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1Steam Turbine Principles and Design | Steam Turbine PrinciplesSteam Turbine Fundamentals | about 7 | 10 | Standard |
| Ch 2–3Steam Turbine Auxiliaries and Operation · Turbine Condenser Systems | Steam Turbine Operation & CondensersSteam Turbine Applications | about 7 | 19 | Lighter |
| Ch 4Gas Turbine Principles and Designs | Gas Turbine PrinciplesGas Turbine Basics | about 7 | 10 | Standard |
| Ch 5Gas Turbine Auxiliaries and Operation | Gas Turbine OperationAdvanced Gas Turbine Systems | about 7 | 10 | Standard |
| Ch 6Internal Combustion Engines | Internal Combustion Engines | about 3 | 10 | Lighter |
| Ch 7Cogeneration Systems and Operation | CogenerationCogeneration Systems | about 7 | 8 | High |
| Ch 8–9Compressor Theory and Designs · Compressor Auxiliaries and Operation | CompressorsCompressor Types & Functions | about 21 | 17 | Highest |
| Ch 10–11Refrigeration Principles and Systems · Refrigeration Auxiliaries and Operation | RefrigerationRefrigeration Systems | about 25 | 18 | Highest |
| Ch 12–13Heat Exchangers and Cooling Towers · Fired Heaters | Heat Exchangers, Cooling Towers & Fired HeatersSpecial Industrial Equipment | about 6 | 16 | Lighter |
| Ch 14Wastewater Treatment | Wastewater Treatment | about 3 | 8 | Lighter |
| Ch 15Plant Maintenance and Administration | Maintenance & Administration | about 7 | 6 | Highest |
The compressor and refrigeration chapters (8 to 11) typically account for close to half of 3B2. Internal combustion engines are a full 10-objective chapter that commonly carries only a few questions.
2nd Class
2nd Class is six papers, all multiple choice since 2A1 converted on January 1, 2025. See the guide to all six 2nd Class papers for sitting order.
2A1
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1–2ASME Code Calculations: Cylindrical Components · ASME Code Calculations: Stayed Surfaces, Pressure Relief Valves and Furnaces | ASME Code CalculationsASME Code: Boiler & Pressure Vessel Calculations, ASME Code Compliance: Sections I & VIII | about 16 | 10 | High |
| Ch 3–7Boiler and Pressure Vessel Legislation · Plant Design and Installation · Management and Supervision · Plant Maintenance · Safety | Industrial AdministrationIndustrial Administration and Plant Management | about 36 | 30 | Standard |
| Ch 8–10Linear Motion · Angular Motion · Friction | Motion, Energy & FrictionKinematics & Basic Mechanics, Energy, Work & Torque, Friction & Circular Motion | about 24 | 23 | Lighter |
| Ch 11Static and Dynamic Forces | Forces, Stress & StrainStress, Strain, and Moments, Shearing Forces & Torsion | about 16 | 9 | High |
| Ch 12Fluid Mechanics | Fluid MechanicsFluid Pressure & Dynamics | about 8 | 9 | Lighter |
Applied mechanics (chapters 8 to 12) typically accounts for close to half of 2A1 and industrial administration (chapters 3 to 7) around a third. Industrial administration is the block candidates most often under-prepare, because it looks like reading. The ASME code chapters and the forces, stress and strain chapter tend to be the best return per objective, and since 2A1 is open-code, a good part of the ASME work is how fast you can find things in the code book.
2A2
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1–3Heat, Expansion of Solids, and Heat Transfer · Thermodynamics of Gases · Thermodynamics of Steam | Heat, Gases & SteamHeat Transfer & Basic Thermodynamics, Gas Laws & Steam Properties | about 16 | 21 | Lighter |
| Ch 4Practical Thermodynamic Cycles | Thermodynamic CyclesEntropy & Practical Thermodynamic Cycles | about 20 | 7 | Highest |
| Ch 5Metallurgy | Metallurgy & Heat TreatmentNon-Ferrous Metals & Structures of Metals, Alloying Elements & Heat Treatment | about 22 | 7 | Highest |
| Ch 6Testing of Metals | Testing, Weld Defects & NDTTesting Procedures & Properties, Weldment Defects and Non-Destructive Testing | about 31 | 12 | Highest |
| Ch 7–8Corrosion of Metals · Introduction to Welding Symbols | Corrosion, Welding & PipingWelding, Corrosion, & Power Piping Applications | about 11 | 13 | Lighter |
2A2 typically leans hard toward materials, with chapters 5 and 6 (metallurgy, testing, weld defects and NDT) commonly accounting for around half the paper. On the thermodynamics side, the cycles chapter (4) tends to carry more questions than the three heat, gas and steam chapters before it combined.
2A3
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1–2Boiler and Steam Generator Components and Design · Specialized Boiler Designs | Boiler DesignBoiler Fundamentals, Advanced Boiler Systems | about 25 | 20 | Standard |
| Ch 3–4Boiler and Steam Generator Operation · Boiler and Steam Generator Maintenance and Inspection | Boiler Operation & Maintenance | about 20 | 14 | High |
| Ch 5Pumps | PumpsPump Basics, Advanced Pump Operations | about 20 | 7 | Highest |
| Ch 6–10Water Chemistry and Analysis · Water Pre-Treatment I · Water Pre-Treatment II · Internal Water Treatment · Non-Boiler Water Treatment | Water TreatmentFeedwater Treatment, Advanced Water Treatment & Wastewater Management | about 35 | 40 | Lighter |
The pumps chapter is the highest-return chapter in 2nd Class: 7 objectives that commonly account for about 20 questions. The boiler chapters typically carry a little under half the paper, and water treatment around a third, spread over five chapters.
2B1
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1–4Steam Turbine Theory and Construction · Steam Turbine Auxiliaries and Control · Steam Turbine Operation and Maintenance · Steam Condensers | Steam Turbines & CondensersSteam Turbine Design, Steam Turbine Operations | about 30 | 41 | Lighter |
| Ch 5–6Internal Combustion Engines: Components and Auxiliaries · Internal Combustion Engines: Operation and Maintenance | Internal Combustion EnginesInternal Combustion Engine Design, Internal Combustion Engines Operations | about 15 | 12 | Standard |
| Ch 7–8Gas Turbine Design and Auxiliaries · Gas Turbine Operation and Control | Gas TurbinesGas Turbine Principles, Advanced Gas Turbine Operation | about 20 | 17 | Standard |
| Ch 9Lubrication | LubricationLubrication Systems | about 20 | 8 | Highest |
| Ch 10Piping | PipingIndustrial Piping Systems | about 10 | 7 | High |
| Ch 11Mechanical Drawing | Mechanical DrawingMechanical Drawing Fundamentals | about 5 | 5 | Standard |
The prime mover chapters (1 to 8) typically account for around two thirds of 2B1, matching the shape of the syllabus. Lubrication is the surprise: a single 8-objective chapter that commonly carries about a fifth of the paper.
2B2
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1–2Power Plant Fuel Systems · Power Plant Water and Steam Systems | Plant Fuel, Water & Steam SystemsFeedwater & Steam Systems, Cooling & Condensate Systems, Fuel & Waste Handling | about 30 | 9 | Highest |
| Ch 3–4Measurement and Control Components · Control Instrumentation Systems | Instrumentation & ControlInstrumentation Basics, Control Devices & Systems, Advanced Control Systems (DCS/PLC) | about 35 | 12 | Highest |
| Ch 5–7Fuels and Combustion Calculations · Firing and Draft Equipment · Combustion Control and Safeguards | Fuels, Combustion & FiringCombustion Principles, Combustion Optimization | about 20 | 24 | Lighter |
| Ch 8–9Environmental Monitoring · Environmental Control Methods | EnvironmentalEmission Controls, Environmental Compliance | about 15 | 15 | Lighter |
2B2 tends to be the most lopsided paper in the program. The plant systems and instrumentation and control chapters (1 to 4) typically account for around two thirds of the questions from only 21 objectives, so expect those questions to go deeper than a chapter summary. The combustion chapters are calculation-heavy, so they take longer per objective than their Lighter rating suggests.
2B3
| From these chapters | Exam topics | Typical questions | Objectives | Focus |
|---|---|---|---|---|
| Ch 1Alternating Current Theory | AC TheoryAC Basics, Advanced AC Theory | about 25 | 10 | Highest |
| Ch 2Direct Current Machines | DC Machines | about 5 | 10 | Lighter |
| Ch 3–6Alternating Current Generators · Alternating Current Motors · Transformers · Electrical System Protection | AC Machines, Transformers & ProtectionAC Machines, Advanced AC Machines, Comprehensive AC Machines | about 30 | 29 | Standard |
| Ch 7Air and Gas Compression | CompressorsCompressor Operations | about 15 | 10 | High |
| Ch 8–10Refrigeration Systems and Equipment · Refrigeration Safety, Control and Operation · Refrigeration Calculations | RefrigerationRefrigeration Basics, Advanced Refrigeration, Specialized Refrigeration Systems | about 25 | 25 | Lighter |
The AC theory chapter typically accounts for about a quarter of 2B3 on its own, and everything in the machines chapters builds on it. DC machines is a full 10-objective chapter that commonly carries only a handful of questions.
1st Class: 1B4
1B4 is the only 1st Class paper in multiple-choice format (from January 2026). The other 1st Class papers are written, so a question breakdown like this doesn't apply to them. Full Steam Ahead doesn't teach 1st Class, so this table has no chapter column.
| Exam topic | Typical questions | Weight |
|---|---|---|
| Financial Management | about 24 | Highest |
| Cost & Inventory Control | about 5 | Lighter |
| Contracts & Ethics | about 8 | Lighter |
| Problem Solving & Leadership | about 27 | Highest |
| Labour Relations & Benchmarking | about 13 | Standard |
| Human Resources | about 18 | High |
| Change & Plant Management | about 5 | Lighter |
Financial management, problem solving and leadership, and human resources typically make up about two thirds of 1B4.
What to do with this
- Cover every chapter once. No chapter is worth zero, and the mix on your paper won't match these numbers exactly.
- Then weight your time by the Focus column. Highest and High chapters get the extra practice rounds.
- Let your practice results overrule the table. A High chapter you already know cold needs less time than a Standard chapter you keep missing. The table is a starting point. Your own scores are what you adjust with.
For the reasoning behind the ratings and a simple way to build them into a study week, read where to focus your power engineering study time. For how candidates have historically done on each class, see power engineering exam pass rates.
Frequently asked questions
Are these the official SOPEEC question counts?
No. SOPEEC publishes the syllabus, the format and the pass mark, but no per-topic or per-chapter split. Each paper is set in several versions through the year and the mix shifts between them. These are typical numbers, meant as a general guide.
How far off could my paper be?
Expect some movement, especially on the smaller topics. That's why the tables say "about" and why nothing here is a reason to skip a chapter.
My textbook's chapter numbers are different. Does this still apply?
The chapter numbers are the Full Steam Ahead course chapters. Their titles are listed with them so you can match them to your own material, and the general weighting applies whatever you study from.
Does a Highest rating mean the chapter is harder?
Not necessarily. It means the chapter typically carries more questions for its size, so extra time there tends to pay off most. Difficulty is personal. Calculation chapters usually take longer per objective than descriptive ones, which is worth adding to the picture.