Every power engineering paper has 100 questions, but the material behind them isn't spread evenly. Some chapters typically feed the exam far more questions than their size suggests. Others are long, detailed and worth only a handful. If you give every chapter the same amount of time, you're over-studying some marks and under-studying others. Here's a simple way to see the difference, and to use it to plan your study week.
Two numbers that matter for every group of chapters
- About how many questions it typically accounts for. On a 100-question paper this is also roughly the percentage of your mark. The typical numbers for every paper are in the SOPEEC exam breakdown by chapter. They're a general guide, not a fixed count: each paper is set in several versions a year and the mix shifts.
- How much there is to learn. The simplest honest measure is the number of learning objectives in the chapters the questions come from. An objective is one specific thing you have to be able to explain or calculate.
Divide the first by the second and you get a rough questions-per-objective figure: how many marks each piece of material tends to be worth. Compare that with the average for the whole paper and you can see straight away which chapters are pulling their weight.
A worked example: 2A3
On 2A3, the pumps chapter has 7 objectives and typically accounts for about 20 questions, roughly 2.9 per objective. The five water treatment chapters have 40 objectives and typically account for about 35, roughly 0.9 per objective.
Water treatment is worth more marks in total, so you absolutely have to cover it. But an hour on pumps tends to be worth around three times as many marks as an hour on water treatment. If you're short on time, and almost everyone working shifts is, that's where the extra practice round goes.
A worked example: 3A1
On 3A1, the four thermodynamics chapters have 28 objectives and typically account for over half the paper, roughly 1.9 questions per objective. The metallurgy and corrosion chapters have 16 objectives and typically account for about 7 questions, roughly 0.4 per objective. Same paper, about a fourfold difference. A candidate who splits their 3A1 time evenly across chapters is spending far too little of it on thermo.
The focus ratings
To keep it simple, the breakdown tables turn this into four ratings, based on how a chapter group's typical questions per objective compare with the average for its paper:
| Rating | Compared with paper average | What it means for your time |
|---|---|---|
| Highest | 1.5 times or more | Best return on the paper. Extra practice rounds go here first. |
| High | 1.15 to 1.5 times | Above-average return. Give it more than its page count suggests. |
| Standard | 0.85 to 1.15 times | About average. Time in proportion to its size. |
| Lighter | Under 0.85 times | Lots of material for the questions. Cover it properly, don't overspend. |
Three things the ratings don't tell you
Lighter is not optional
The pass mark is 65%. A Lighter chapter group can still typically account for 10, 14 or 20 questions, and the version you write may lean on it more than usual. Skip it and you've given away a big piece of your margin before you sit down. Every chapter gets covered. The ratings decide where the second and third passes go.
Calculation chapters take longer per objective
An objective that asks you to calculate a combustion air requirement takes longer to master than one that asks you to describe a fan. A calculation-heavy chapter rated Standard can need as much time as a descriptive one rated High. Factor that in.
Your own results beat the general picture
The ratings are a starting point for everybody. Once you've done a few chapter quizzes and a practice exam, your own weak areas are better information than any table. A High topic you already score 90% on needs less time than a Standard topic you keep missing.
Turning it into a study week
- List the chapter groups for your paper from the breakdown tables, with their typical questions and rating.
- First pass: cover everything. Work through every chapter once, in a sensible order. Foundations (math, basic theory) come first because everything else uses them.
- Second pass: weight by rating. Spend roughly twice as long on Highest and High chapters as on Lighter ones. This is where practice questions do the most good.
- Test, then re-weight. After a practice exam, move time toward the chapters you're losing marks on, whatever their rating.
- Last stretch: full timed papers. 100 questions in 3 hours is under two minutes each. See exam time management for pacing.
For overall time budgets, see how long it takes to prepare for a power engineering exam.
How Full Steam Ahead uses this
Every 2nd and 3rd Class course on the platform is broken into chapters and objectives, the same ones these numbers come from. After each practice exam you get a weak-area breakdown by chapter, so the third step above, re-weighting by your own results, happens automatically. 4th Class prep includes unlimited chapter tests and full practice exams with the same breakdown. We're building paper-by-paper study plans on top of these ratings next.